X3R Xenon and the advanced satellite

General discussions about the games by Egosoft including X-BTF, XT, X², X³: Reunion, X³: Terran Conflict and X³: Albion Prelude.

Moderator: Moderators for English X Forum

Post Reply
pengwin
Posts: 37
Joined: Sun, 1. Mar 09, 07:14

X3R Xenon and the advanced satellite

Post by pengwin » Tue, 10. Mar 09, 23:10

the bala gi mission where you place the advance satellite is impossible....for me. the xenon hate me and they wont let me get the satellite placed. When i get to 0,0,0 they destroy me or the satellite.

any tips?

User avatar
esd
Posts: 17964
Joined: Tue, 2. Sep 03, 05:57
x3tc

Post by esd » Tue, 10. Mar 09, 23:13

Use a really fast ship, drop the satellite roughly in the middle and jump out :)
esd's Guides: X² Loops - X³ MORTs

Betheball
Posts: 74
Joined: Sun, 28. Dec 08, 06:21
x3ap

Post by Betheball » Tue, 10. Mar 09, 23:14

That ones easy, what ship are you using? I used the fastest m5 I could get, with a jump drive and zip in there, place the sat and jump straight out. They didn't get anywhere near me. Give that a go:)
Last edited by Betheball on Tue, 10. Mar 09, 23:15, edited 1 time in total.

pengwin
Posts: 37
Joined: Sun, 1. Mar 09, 07:14

Post by pengwin » Tue, 10. Mar 09, 23:15

what is roughly in the middle? +/- 50m? +/- 500m?

Betheball
Posts: 74
Joined: Sun, 28. Dec 08, 06:21
x3ap

Post by Betheball » Tue, 10. Mar 09, 23:18

Just do it quick and put it as close as you can and jump out. If it's right you'll know soon enough and if not give it another go. Just use the sector map and double click in the center, that should get you there.

maphys
Posts: 6075
Joined: Sat, 16. Dec 06, 17:42
x3tc

Post by maphys » Tue, 10. Mar 09, 23:19

Fly in, fly down (out of the ecliptic) then use the move to position command to fly towards 0,0,0. When you see your speed start to drop, eject the satellite and hit tab, then jump out. Disco Hauler is one of the best ships for this.

Re: how close - I think 500m tolerance is a good ballpark figure, but bear in mind that distance is 3D. So 500,0,0 may be fine but 500,500,500 may not!

M

pengwin
Posts: 37
Joined: Sun, 1. Mar 09, 07:14

Post by pengwin » Wed, 11. Mar 09, 03:46

Ok, i'll have another go. Im really thinking about just buying and equipping a fleet of Nova's and M6's to come and clear the sector, i've got the cash to do it.

ephemeron
Posts: 445
Joined: Thu, 17. Jan 08, 05:18
x4

Post by ephemeron » Wed, 11. Mar 09, 03:57

pengwin wrote:Ok, i'll have another go. Im really thinking about just buying and equipping a fleet of Nova's and M6's to come and clear the sector, i've got the cash to do it.
You're probably better off either using one M2 to clear the sector, or one Discoverer to run past the Xenon to place the satellite. A fleet of M3's and M6's under AI control will definitely take losses, and may not be able to deal with the capital ships.

bravoman
Posts: 482
Joined: Tue, 22. Jun 04, 18:41
x3ap

Post by bravoman » Wed, 11. Mar 09, 04:00

Did you try the Jump and Fly to Position command?

Use the ff. steps.
1.) Buy the fastest ship you can find.
2.) Equip that ship with a jump drive and all the necessary software.
3.) Use the Jump and Fly to Position command to jump to the sector
- On the sector map, filter the view by ships. This will force the cursor to the 0,0,0 position.
4.) Jump and fly away. :D
5.) Upon arriving at the spot, drop the satellite and jump out.

Hope that helps.

pengwin
Posts: 37
Joined: Sun, 1. Mar 09, 07:14

Post by pengwin » Wed, 11. Mar 09, 04:12

bravoman wrote:Did you try the Jump and Fly to Position command?

Use the ff. steps.
1.) Buy the fastest ship you can find.
2.) Equip that ship with a jump drive and all the necessary software.
3.) Use the Jump and Fly to Position command to jump to the sector
- On the sector map, filter the view by ships. This will force the cursor to the 0,0,0 position.
4.) Jump and fly away. :D
5.) Upon arriving at the spot, drop the satellite and jump out.

Hope that helps.
#3....did not know that, gonna try it asap, gotta write a speech first.

bravoman
Posts: 482
Joined: Tue, 22. Jun 04, 18:41
x3ap

Post by bravoman » Wed, 11. Mar 09, 04:29

pengwin wrote:
bravoman wrote:Did you try the Jump and Fly to Position command?

Use the ff. steps.
1.) Buy the fastest ship you can find.
2.) Equip that ship with a jump drive and all the necessary software.
3.) Use the Jump and Fly to Position command to jump to the sector
- On the sector map, filter the view by ships. This will force the cursor to the 0,0,0 position.
4.) Jump and fly away. :D
5.) Upon arriving at the spot, drop the satellite and jump out.

Hope that helps.
#3....did not know that, gonna try it asap, gotta write a speech first.
Forgot to add that #3 (resetting to 0,0,0) will only work as long as
1.) You don't have a satellite already existing in the sector (as it is considered a ship).
2.) There are no laser towers in the sector.

senectus
Posts: 26
Joined: Wed, 14. Sep 05, 09:45

Post by senectus » Wed, 11. Mar 09, 05:36

I did this mission for the first time the other night, you don't need to be a 0,0,0

I guessed a spot that was close to the middle (unfortunately right next to a bloody xenon base).
Flew in with a Nova, had to kill a couple of fighters and dropped it and jumped out immediately.


I think there is quite a decent tolerance for "the middle"
X2 and X3:R Linux port player.

pengwin
Posts: 37
Joined: Sun, 1. Mar 09, 07:14

Post by pengwin » Wed, 11. Mar 09, 06:01

i dropped one pretty close to the middle but it said i wasnt close enough. im gonna have a go again..right now.

eladan
Posts: 7168
Joined: Sat, 7. Jan 06, 16:01
x4

Post by eladan » Wed, 11. Mar 09, 06:12

Just remember that (0,0,0) is a 3-D location - Insert is your friend to ensure that you are in the middle in all 3 axes.

pengwin
Posts: 37
Joined: Sun, 1. Mar 09, 07:14

Post by pengwin » Wed, 11. Mar 09, 06:34

yeah, it worked this time, when my ship started to slow down near 0,0,0 i dropped the satellite and jumped.

Post Reply

Return to “X Trilogy Universe”