X3FL [Linux] - Launcher Crash from Steam

Ask here if you experience technical problems with X³: Terran Conflict, X³: Albion Prelude or X³: Farnham's Legacy.

Moderators: timon37, Moderators for English X Forum

Post Reply
aradapilot
Posts: 22
Joined: Wed, 18. May 11, 05:41
x4

X3FL [Linux] - Launcher Crash from Steam

Post by aradapilot » Tue, 14. May 24, 06:00

X3FL 1.3 English
No mods ever, tested multiple clean vanilla installs
Ubuntu 23.10, Ryzen 5800X, 32G ram, radeon RX6800

Running via steam brings up the launcher. this all seems to work, but when I click "Start X3:FL" it crashes. Tried many settings combinations at first, but it's a deeper issue.
I can run the X3FL_main binary directly, and the game works fine. It's disconnected from steam with this method though, so it kills a lot of convenience. This shows the game *will* work, however.



Only log I could find was `test_log` in the app dir, it is updated every time this happens based on mtime, just one line - if I use the steam runtime, this log gets emptied, but the behavior is the same:

ERROR: ld.so: object '/home/xxx/.steam/ubuntu12_64/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS64): ignored.

[NOTE: steam overlay is disabled, so this is...something else?]



PS:

xxx 21371 19030 0 23:44 ? 00:00:00 /bin/sh -c /home/xxx/.steam/ubuntu12_32/reaper SteamLaunch AppId=483330 -- /home/xxx/.steam/ubuntu12_32/steam-launch-wrapper -- '/home/xxx/.steam/steam/steamapps/common/X3 Terran Conflict/testandlaunch' X3FL_config
xxx 21372 21371 0 23:44 ? 00:00:00 /home/xxx/.steam/ubuntu12_32/reaper SteamLaunch AppId=483330 -- /home/xxx/.steam/ubuntu12_32/steam-launch-wrapper -- /home/xxx/.steam/steam/steamapps/common/X3 Terran Conflict/testandlaunch X3FL_config
xxx 21373 21372 0 23:44 ? 00:00:00 /bin/bash /home/xxx/.steam/steam/steamapps/common/X3 Terran Conflict/testandlaunch X3FL_config
xxx 21388 21373 2 23:44 ? 00:00:00 ./X3FL_config



STEAM CLI OUTPUT:


/bin/sh\0-c\0/home/xxx/.steam/ubuntu12_32/reaper SteamLaunch AppId=483330 -- /home/xxx/.steam/ubuntu12_32/steam-launch-wrapper -- '/home/xxx/.steam/steam/steamapps/common/SteamLinuxRuntime_soldier'/_v2-entry-point --verb=waitforexitandrun -- '/home/xxx/.steam/steam/steamapps/common/SteamLinuxRuntime'/scout-on-soldier-entry-point-v2 -- '/home/xxx/.steam/steam/steamapps/common/X3 Terran Conflict/testandlaunch' X3FL_config\0
chdir "/home/xxx/.steam/steam/steamapps/common/X3 Terran Conflict"
ERROR: ld.so: object '/home/xxx/.steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/xxx/.steam/ubuntu12_64/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS64): ignored.
ERROR: ld.so: object '/home/xxx/.steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/xxx/.steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/xxx/.steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
pid 18673 != 18669, skipping destruction (fork without exec?)
pid 18678 != 18669, skipping destruction (fork without exec?)
*** X3FL version 1.3 (Nov 4 2021 17:32:55) ***
../X3/s_linux/init.cpp : XMenuInit : 254 : dStub
Found lang.dat with ID 44
../X3/s_linux/simd_float.cpp : lgp_get_cpu_flags : 12 : dStub
ERROR: CPUID is not supported, can't detect CPU features
Trying to continue anyway with minimal settings
Video category:
Monitor Idx = 0
Width = 2560
Height = 1440
Bits Per Pixel = 32
Vertical Sync = 0
Border Less = 1
Texture Quality = 0
Shader Quality = 0
View Distance = 0
AA Mode = 1
AF Mode = 4
Gamma = 127
Frame Finish = 0
Hack FPS Replace Text = 0
Lower AQC FrameRate = 10.000000
Upper AQC FrameRate = 25.000000
Memory = 128
Audio category:
Master Volume = 255
SFX Volume = 255
Voice Volume = 230
Music Volume = 204
Input category:
Mouse Grab = 1
Joy Index = -1
Joy 1X Src = 0
Joy 1Y Src = 1
Joy 2X Src = 2
Joy 2Y Src = 3
Joy Rudder Src = 5
Joy Throttle Src = 4
Joy TriggerL Src = 6
Joy TriggerR Src = 7
Joy 1X Scale = 1.000000
Joy 1Y Scale = 1.000000
Joy 2X Scale = 1.000000
Joy 2Y Scale = 1.000000
Joy Rudder Scale = 1.000000
Joy Throttle Scale = 1.000000
Joy TriggerL Scale = 1.000000
Joy TriggerR Scale = 1.000000
Joy Button0 Src = 0
Joy Button1 Src = 1
Joy Button2 Src = 2
Joy Button3 Src = 3
Joy Button4 Src = 4
Joy Button5 Src = 5
Joy Button6 Src = 6
Joy Button7 Src = 7
Joy Button8 Src = 8
Joy Button9 Src = 9
Joy Button10 Src = 10
Joy Button11 Src = 11
Joy Button12 Src = 12
Joy Button13 Src = 13
Joy Button14 Src = 14
Joy Button15 Src = 15
Joy Button16 Src = 16
Joy Button17 Src = 17
Joy Button18 Src = 18
Joy Button19 Src = 19
Joy Button20 Src = 20
Joy Button21 Src = 21
Joy Button22 Src = 22
Joy Button23 Src = 23
Joy Button24 Src = 24
Joy Button25 Src = 25
Joy Button26 Src = 26
Joy Button27 Src = 27
Joy Button28 Src = 28
Joy Button29 Src = 29
Other category:
Capture Folder = /home/xxx/.config/EgoSoft/X3FL
Profile = default
Player Logo Number = 0
Player Logo Name = (null)
../X3/s_linux/init.cpp : S_GetCPUSpeed : 341 : dStub
No dump, because DEBUG disabled
SB_LoadLocation() loading story file x3config
Gtk-Message: 23:39:01.409: Failed to load module "gail"
Gtk-Message: 23:39:01.409: Failed to load module "atk-bridge"
Gtk-Message: 23:39:01.413: Failed to load module "canberra-gtk-module"
../X3/s_linux/ConfigDialogLin.cpp : Video_DisplayChange : 2494 : monitoridx = 0
../X3/s_linux/ConfigDialogLin.cpp : Video_DisplayChange : 2494 : monitoridx = 0
../X3/s_linux/ConfigDialogLin.cpp : Video_DisplayChange : 2494 : monitoridx = 0
../X3/s_linux/ConfigDialogLin.cpp : Video_DisplayChange : 2494 : monitoridx = 0
../X3/s_linux/sdl2/sio.cpp : main : 1250 : dPStub: atexit (_quit);
*** X3FL version 1.3 (Nov 4 2021 17:33:06) ***
../X3/s_linux/init.cpp : XMenuInit : 254 : dStub
Found lang.dat with ID 44
../X3/s_linux/simd_float.cpp : lgp_get_cpu_flags : 12 : dStub
ERROR: CPUID is not supported, can't detect CPU features
Trying to continue anyway with minimal settings
Setting breakpad minidump AppID = 483330
Steam_SetMinidumpSteamID: Caching Steam ID: 76561197998115486 [API loaded no]
Steam API initialised, community user name: xxx
Video category:
Monitor Idx = 0
Width = 1600
Height = 1200
Bits Per Pixel = 32
Vertical Sync = 0
Border Less = 0
Texture Quality = 0
Shader Quality = 0
View Distance = 0
AA Mode = 1
AF Mode = 4
Gamma = 127
Frame Finish = 0
Hack FPS Replace Text = 0
Lower AQC FrameRate = 10.000000
Upper AQC FrameRate = 25.000000
Memory = 128
Audio category:
Master Volume = 255
SFX Volume = 255
Voice Volume = 230
Music Volume = 204
Input category:
Mouse Grab = 1
Joy Index = -1
Joy 1X Src = 0
Joy 1Y Src = 1
Joy 2X Src = 2
Joy 2Y Src = 3
Joy Rudder Src = 5
Joy Throttle Src = 4
Joy TriggerL Src = 6
Joy TriggerR Src = 7
Joy 1X Scale = 1.000000
Joy 1Y Scale = 1.000000
Joy 2X Scale = 1.000000
Joy 2Y Scale = 1.000000
Joy Rudder Scale = 1.000000
Joy Throttle Scale = 1.000000
Joy TriggerL Scale = 1.000000
Joy TriggerR Scale = 1.000000
Joy Button0 Src = 0
Joy Button1 Src = 1
Joy Button2 Src = 2
Joy Button3 Src = 3
Joy Button4 Src = 4
Joy Button5 Src = 5
Joy Button6 Src = 6
Joy Button7 Src = 7
Joy Button8 Src = 8
Joy Button9 Src = 9
Joy Button10 Src = 10
Joy Button11 Src = 11
Joy Button12 Src = 12
Joy Button13 Src = 13
Joy Button14 Src = 14
Joy Button15 Src = 15
Joy Button16 Src = 16
Joy Button17 Src = 17
Joy Button18 Src = 18
Joy Button19 Src = 19
Joy Button20 Src = 20
Joy Button21 Src = 21
Joy Button22 Src = 22
Joy Button23 Src = 23
Joy Button24 Src = 24
Joy Button25 Src = 25
Joy Button26 Src = 26
Joy Button27 Src = 27
Joy Button28 Src = 28
Joy Button29 Src = 29
Other category:
Capture Folder = /home/xxx/.config/EgoSoft/X3FL
Profile = default
Player Logo Number = 0
Player Logo Name = (null)
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 211 : dPStub: Setting D3DF_ALPHATRANS to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 214 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 216 : dPStub: Setting D3DF_MODULATEALPHA to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 219 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 221 : dPStub: Setting D3DF_MULTITEXTURE to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 224 : dStub
../X3/s_linux/init.cpp : S_GetCPUSpeed : 341 : dStub
No dump, because DEBUG disabled
SB_LoadLocation() loading story file x3config
No dump, because DEBUG disabled
Fatal glibc error: malloc.c:2594 (sysmalloc): assertion failed: (old_top == initial_top (av) && old_size == 0) || ((unsigned long) (old_size) >= MINSIZE && prev_inuse (old_top) && ((unsigned long) old_end & (pagesize - 1)) == 0)
/home/xxx/.steam/steam/steamapps/common/X3 Terran Conflict/testandlaunch: line 32: 18716 Aborted (core dumped) ./$cmd "$@"
Game 483330 created interface STEAMAPPLIST_INTERFACE_VERSION001 / AppList
Game 483330 created interface STEAMAPPS_INTERFACE_VERSION008 / Apps
Game 483330 created interface STEAMHTMLSURFACE_INTERFACE_VERSION_003 / HTMLSurface
Game 483330 created interface STEAMHTTP_INTERFACE_VERSION002 / HTTP
Game 483330 created interface STEAMINVENTORY_INTERFACE_V001 / Inventory
Game 483330 created interface STEAMMUSICREMOTE_INTERFACE_VERSION001 / MusicRemote
Game 483330 created interface STEAMMUSIC_INTERFACE_VERSION001 / Music
Game 483330 created interface STEAMREMOTESTORAGE_INTERFACE_VERSION013 / RemoteStorage
Game 483330 created interface STEAMSCREENSHOTS_INTERFACE_VERSION002 / Screenshots
Game 483330 created interface STEAMUGC_INTERFACE_VERSION008 / UGC
Game 483330 created interface STEAMUNIFIEDMESSAGES_INTERFACE_VERSION001 / UnifiedMessages
Game 483330 created interface STEAMUSERSTATS_INTERFACE_VERSION011 / UserStats
Game 483330 created interface STEAMVIDEO_INTERFACE_V001 / Video
Game 483330 created interface SteamController003 / Controller
Game 483330 created interface SteamFriends015 / Friends
Game 483330 created interface SteamMatchMaking009 / Matchmaking
Game 483330 created interface SteamMatchMakingServers002 / MatchmakingServers
Game 483330 created interface SteamNetworking005 / Networking
Game 483330 created interface SteamUser019 / User
Game 483330 created interface SteamUtils008 / Utils
Game 483330 method call count for IClientUserStats::RequestCurrentStats : 1
Game 483330 method call count for IClientUtils::RecordSteamInterfaceCreation : 22
Game 483330 method call count for IClientUtils::GetAppID : 24
Game 483330 method call count for IClientFriends::GetPersonaName : 1
Game 483330 method call count for IClientUser::GetSteamID : 1
Uploaded AppInterfaceStats to Steam

isosphere
Posts: 9
Joined: Fri, 3. May 24, 23:47
x4

Re: X3FL [Linux] - Launcher Crash from Steam

Post by isosphere » Wed, 15. May 24, 20:46

I believe this is the core issue:

Code: Select all

Fatal glibc error: malloc.c:2594 (sysmalloc): assertion failed: (old_top == initial_top (av) && old_size == 0) || ((unsigned long) (old_size) >= MINSIZE && prev_inuse (old_top) && ((unsigned long) old_end & (pagesize - 1)) == 0)
Which implies something in the steam launching pipeline is doing some naughty memory things like using freed memory / freeing memory twice / etc. I don't have any trouble running X3FL via Steam on Debian Bookworm on a much more under-powered system than you're using. Have you tried executing the launcher manually (the X3AP one is X3AP_config, FL is probably similar?) or validating your install? (right click, properties, installed files, verify integrity).

e: just a thought, but are you using a "weird" default shell? i.e. `echo $SHELL`

aradapilot
Posts: 22
Joined: Wed, 18. May 11, 05:41
x4

Re: X3FL [Linux] - Launcher Crash from Steam

Post by aradapilot » Thu, 16. May 24, 23:48

-Yep, tried validating/reinstall/etc, no dice.

- launcher fails from CLI (./X3FL_main works from this same dir) - I'm guessing the steam launcher does some custom cd/preload/etc, as the launcher opens fine from steam
~/.steam/steam/steamapps/common/X3 Terran Conflict$ ./X3FL_config
./X3FL_config: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory

- nope on custom shell, just bash

isosphere
Posts: 9
Joined: Fri, 3. May 24, 23:47
x4

Re: X3FL [Linux] - Launcher Crash from Steam

Post by isosphere » Fri, 17. May 24, 13:13

aradapilot wrote:
Thu, 16. May 24, 23:48
./X3FL_config: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
Oh, you can fix this easy-peasy. The launcher gives me an issue about libjpeg, too. You just need to find an i386 binary of that library and shove it in lib_config. You can use apt-file to locate such libraries - but I had trouble using that for my libjpeg problem because Debian has long since changed libjpeg implementations, but it was available here: https://snapshot.debian.org/

You can open .deb files in an archive manager like Ark and extract just the library you need so that you can be placed in lib_config.

aradapilot
Posts: 22
Joined: Wed, 18. May 11, 05:41
x4

Re: X3FL [Linux] - Launcher Crash from Steam

Post by aradapilot » Fri, 17. May 24, 16:53

added 3 missing x86 libs to get the launcher open on CLI. this works, but it gets me to the same place as launching X3FL_main directly. It still has the same failures from steam.

[code]
~/.steam/steam/steamapps/common/X3 Terran Conflict$ ./testandlaunch X3FL_config
*** X3FL version 1.3 (Nov 4 2021 17:32:55) ***
../X3/s_linux/init.cpp : XMenuInit : 254 : dStub
Found lang.dat with ID 44
../X3/s_linux/simd_float.cpp : lgp_get_cpu_flags : 12 : dStub
ERROR: CPUID is not supported, can't detect CPU features
Trying to continue anyway with minimal settings
Video category:
Monitor Idx = 0
Width = 1600
Height = 1200
Bits Per Pixel = 32
Vertical Sync = 0
Border Less = 0
Texture Quality = 0
Shader Quality = 0
View Distance = 0
AA Mode = 1
AF Mode = 4
Gamma = 127
Frame Finish = 0
Hack FPS Replace Text = 0
Lower AQC FrameRate = 10.000000
Upper AQC FrameRate = 25.000000
Memory = 128
Audio category:
Master Volume = 255
SFX Volume = 255
Voice Volume = 230
Music Volume = 204
Input category:
Mouse Grab = 1
Joy Index = -1
Joy 1X Src = 0
Joy 1Y Src = 1
Joy 2X Src = 2
Joy 2Y Src = 3
Joy Rudder Src = 5
Joy Throttle Src = 4
Joy TriggerL Src = 6
Joy TriggerR Src = 7
Joy 1X Scale = 1.000000
Joy 1Y Scale = 1.000000
Joy 2X Scale = 1.000000
Joy 2Y Scale = 1.000000
Joy Rudder Scale = 1.000000
Joy Throttle Scale = 1.000000
Joy TriggerL Scale = 1.000000
Joy TriggerR Scale = 1.000000
Joy Button0 Src = 0
Joy Button1 Src = 1
Joy Button2 Src = 2
Joy Button3 Src = 3
Joy Button4 Src = 4
Joy Button5 Src = 5
Joy Button6 Src = 6
Joy Button7 Src = 7
Joy Button8 Src = 8
Joy Button9 Src = 9
Joy Button10 Src = 10
Joy Button11 Src = 11
Joy Button12 Src = 12
Joy Button13 Src = 13
Joy Button14 Src = 14
Joy Button15 Src = 15
Joy Button16 Src = 16
Joy Button17 Src = 17
Joy Button18 Src = 18
Joy Button19 Src = 19
Joy Button20 Src = 20
Joy Button21 Src = 21
Joy Button22 Src = 22
Joy Button23 Src = 23
Joy Button24 Src = 24
Joy Button25 Src = 25
Joy Button26 Src = 26
Joy Button27 Src = 27
Joy Button28 Src = 28
Joy Button29 Src = 29
Other category:
Capture Folder = /home/xxx/.config/EgoSoft/X3FL
Profile = default
Player Logo Number = 0
Player Logo Name = (null)
../X3/s_linux/init.cpp : S_GetCPUSpeed : 341 : dStub
No dump, because DEBUG disabled
SB_LoadLocation() loading story file x3config
Gtk-Message: 10:48:49.437: Failed to load module "gail"
Gtk-Message: 10:48:49.437: Failed to load module "atk-bridge"

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.440: Unable to locate theme engine in module_path: "adwaita",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.440: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.441: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.441: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.441: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.441: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.441: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.441: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.441: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.441: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.442: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.442: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.442: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.442: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.442: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.442: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.442: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.442: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.442: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.442: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.442: Unable to locate theme engine in module_path: "murrine",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.442: Unable to locate theme engine in module_path: "murrine",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.442: Unable to locate theme engine in module_path: "pixmap",

(X3FL_config:41145): Gtk-WARNING **: 10:48:49.442: Unable to locate theme engine in module_path: "adwaita",
Gtk-Message: 10:48:49.443: Failed to load module "canberra-gtk-module"
[/code]


this opens the launcher, but disconnected from steam. then I can click "start x3:fl" and it opens:


[code]
../X3/s_linux/sdl2/sio.cpp : main : 1250 : dPStub: atexit (_quit);
*** X3FL version 1.3 (Nov 4 2021 17:33:06) ***
../X3/s_linux/init.cpp : XMenuInit : 254 : dStub
Found lang.dat with ID 44
../X3/s_linux/simd_float.cpp : lgp_get_cpu_flags : 12 : dStub
ERROR: CPUID is not supported, can't detect CPU features
Trying to continue anyway with minimal settings
[S_API FAIL] SteamAPI_Init() failed; no appID found.
Either launch the game from Steam, or put the file steam_appid.txt containing the correct appID in your game folder.
======================================
SteamStats::RequestStats() failed, Steam API not enabled
======================================
Video category:
Monitor Idx = 0
Width = 1600
Height = 1200
Bits Per Pixel = 32
Vertical Sync = 0
Border Less = 0
Texture Quality = 0
Shader Quality = 0
View Distance = 0
AA Mode = 1
AF Mode = 4
Gamma = 127
Frame Finish = 0
Hack FPS Replace Text = 0
Lower AQC FrameRate = 10.000000
Upper AQC FrameRate = 25.000000
Memory = 128
Audio category:
Master Volume = 255
SFX Volume = 255
Voice Volume = 230
Music Volume = 204
Input category:
Mouse Grab = 1
Joy Index = -1
Joy 1X Src = 0
Joy 1Y Src = 1
Joy 2X Src = 2
Joy 2Y Src = 3
Joy Rudder Src = 5
Joy Throttle Src = 4
Joy TriggerL Src = 6
Joy TriggerR Src = 7
Joy 1X Scale = 1.000000
Joy 1Y Scale = 1.000000
Joy 2X Scale = 1.000000
Joy 2Y Scale = 1.000000
Joy Rudder Scale = 1.000000
Joy Throttle Scale = 1.000000
Joy TriggerL Scale = 1.000000
Joy TriggerR Scale = 1.000000
Joy Button0 Src = 0
Joy Button1 Src = 1
Joy Button2 Src = 2
Joy Button3 Src = 3
Joy Button4 Src = 4
Joy Button5 Src = 5
Joy Button6 Src = 6
Joy Button7 Src = 7
Joy Button8 Src = 8
Joy Button9 Src = 9
Joy Button10 Src = 10
Joy Button11 Src = 11
Joy Button12 Src = 12
Joy Button13 Src = 13
Joy Button14 Src = 14
Joy Button15 Src = 15
Joy Button16 Src = 16
Joy Button17 Src = 17
Joy Button18 Src = 18
Joy Button19 Src = 19
Joy Button20 Src = 20
Joy Button21 Src = 21
Joy Button22 Src = 22
Joy Button23 Src = 23
Joy Button24 Src = 24
Joy Button25 Src = 25
Joy Button26 Src = 26
Joy Button27 Src = 27
Joy Button28 Src = 28
Joy Button29 Src = 29
Other category:
Capture Folder = /home/xxx/.config/EgoSoft/X3FL
Profile = default
Player Logo Number = 0
Player Logo Name = (null)
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 211 : dPStub: Setting D3DF_ALPHATRANS to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 214 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 216 : dPStub: Setting D3DF_MODULATEALPHA to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 219 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 221 : dPStub: Setting D3DF_MULTITEXTURE to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 224 : dStub
../X3/s_linux/init.cpp : S_GetCPUSpeed : 341 : dStub
No dump, because DEBUG disabled
SB_LoadLocation() loading story file x3config
No dump, because DEBUG disabled
../X3/s_linux/sdl2/svideo.cpp : S_InitVideo : 1109 : dPStub: SDL_WM_SetIcon( icon, NULL );
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 211 : dPStub: Setting D3DF_ALPHATRANS to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 214 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 216 : dPStub: Setting D3DF_MODULATEALPHA to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 219 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 221 : dPStub: Setting D3DF_MULTITEXTURE to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 224 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_Create3DDevice : 379 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_Create3DDevice : 382 : glGetString(GL_VENDOR) = AMD
../X3/s_linux/sdl2/svideo.cpp : S_Create3DDevice : 383 : glGetString(GL_RENDERER) = AMD Radeon RX 6800 (navi21, LLVM 15.0.7, DRM 3.54, 6.5.0-35-generic)
../X3/s_linux/sdl2/svideo.cpp : S_Create3DDevice : 384 : glGetString(GL_VERSION) = 4.6 (Compatibility Profile) Mesa 23.2.1-1ubuntu3.1
../X3/s_linux/sdl2/svideo.cpp : S_Create3DDevice : 385 : glGetString(GL_SHADING_LANGUAGE_VERSION) = 4.60
../X3/s_linux/sdl2/svideo.cpp : S_Create3DDevice : 421 : dPStub: Need to detect if postprocess must be turned off
../X3/s_linux/sdl2/svideo.cpp : S_Create3DDevice : 436 : dPStub: Not sure if we don't need to load some LightMaps here?
Cannot connect to server socket err = No such file or directory
Cannot connect to server request channel
jack server is not running or cannot be started
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
JackShmReadWritePtr::~JackShmReadWritePtr - Init not done for -1, skipping unlock
../X3/s_linux/init.cpp : Int_OpenAL_Init : 906 : al first err 0
======================================
PROGRAM: 19 0x0 RenderPrimitive: compiled
======================================
======================================
PROGRAM: 0 0x0 scenebuffer: compiled
======================================
======================================
PROGRAM: 1 0x0 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x1 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x2 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x3 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x4 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x5 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x6 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x7 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x8 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x9 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0xa BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0xb BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0xc BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0xd BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0xe BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0xf BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x10 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x11 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x12 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x13 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x14 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x15 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x16 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x17 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x20 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x21 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x22 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x23 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x24 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x25 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x26 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 1 0x27 BaseNormalShip: compiled
======================================
======================================
PROGRAM: 2 0x0 BaseNormalShipBumpOld: compiled
======================================
======================================
PROGRAM: 3 0x0 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x1 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x2 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x3 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x4 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x5 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x6 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x7 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x8 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x9 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0xa xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0xb xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0xc xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0xd xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0xe xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0xf xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x10 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x11 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x12 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x13 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x14 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x15 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x16 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x17 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x20 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x21 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x22 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x23 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x24 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x25 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x26 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x27 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x40 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x41 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x42 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x43 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x44 xt_standard_lighting: compiled
======================================
======================================
PROGRAM: 3 0x45 xt_standard_lighting: compiled
======================================
....
======================================
PROGRAM: 13 0x0 Particle: compiled
======================================
======================================
PROGRAM: 14 0x0 Bloom_normalize: compiled
======================================
======================================
PROGRAM: 15 0x0 Bloom_bloom: compiled
======================================
======================================
PROGRAM: 16 0x0 Bloom_combine: compiled
======================================
======================================
PROGRAM: 17 0x0 texenv: compiled
======================================
======================================
PROGRAM: 18 0x0 adeffects: compiled
======================================
======================================
PROGRAM: 20 0x0 tag: compiled
======================================
dS3D_NameSpace(InitPostProcessFX)dS3D_NameSpace(InitPostProcessFX)dS3D_NameSpace(InitPostProcessFX)dS3D_NameSpace(InitPostProcessFX)dS3D_NameSpace(InitPostProcessFX)
J3D_LoadCut2: Loaded embedded body 901000003
J3D_LoadCut2: Loaded embedded body 901000004
J3D_LoadCut2: Loaded embedded body 901300000
J3D_LoadCut2: Loaded embedded body 901300001
J3D_LoadCut2: Loaded embedded body 901300003
J3D_LoadCut2: Loaded embedded body 901400003
J3D_LoadCut2: Loaded embedded body 901400004
J3D_LoadCut2: Loaded embedded body 901400005
J3D_LoadCut2: Loaded embedded body 909900003
J3D_LoadCut2: Loaded embedded body 909900004
J3D_LoadCut2: Loaded embedded body 909900005
No dump, because DEBUG disabled
J3D_FreeCut() freeing cut 4097
J3D_FreeCut() freeing cut 4145
J3D_FreeCut() freeing cut 4161
J3D_FreeCut() freeing cut 4162
J3D_FreeCut() freeing cut 4163
J3D_FreeCut() freeing cut 4169
J3D_FreeCut() freeing cut 4177
J3D_FreeCut() freeing cut 4178
J3D_FreeCut() freeing cut 4191
J3D_FreeCut() freeing cut 4200
J3D_FreeCut() freeing cut 4207
J3D_FreeCut() freeing cut 4209
J3D_FreeCut() freeing cut 4210
J3D_FreeCut() freeing cut 4211
J3D_FreeCut() freeing cut 4212
J3D_FreeCut() freeing cut 4213
J3D_FreeCut() freeing cut 4218
J3D_FreeCut() freeing cut 4228
J3D_FreeCut() freeing cut 4279
J3D_FreeCut() freeing cut 4280
J3D_FreeCut() freeing cut 4281
J3D_FreeCut() freeing cut 4438
J3D_FreeCut() freeing cut 4446
J3D_FreeCut() freeing cut 4700
J3D_FreeCut() freeing cut 4702
J3D_FreeCut() freeing cut 4704
J3D_FreeCut() freeing cut 4706
J3D_FreeCut() freeing cut 641
J3D_FreeCut() freeing cut 4774
J3D_FreeCut() freeing cut 4775
J3D_FreeCut() freeing cut 9000
J3D_FreeCut() freeing cut 4906
J3D_FreeCut() freeing cut 9008
J3D_FreeCut() freeing cut 9009
J3D_FreeCut() freeing cut 9010
J3D_FreeCut() freeing cut 9013
J3D_FreeCut() freeing cut 9014
J3D_FreeCut() freeing cut 50000
J3D_FreeCut() freeing cut 50001
J3D_FreeCut() freeing cut 50002
J3D_FreeCut() freeing cut 50007
J3D_FreeCut() freeing cut 50008
J3D_FreeCut() freeing cut 50010
J3D_FreeCut() freeing cut 50012
J3D_FreeCut() freeing cut 50013
J3D_FreeCut() freeing cut 50014
J3D_FreeCut() freeing cut 50015
J3D_FreeCut() freeing cut 50016
J3D_FreeCut() freeing cut 50019
J3D_FreeCut() freeing cut 50020
J3D_FreeCut() freeing cut 50021
J3D_FreeCut() freeing cut 50022
J3D_FreeCut() freeing cut 50023
J3D_FreeCut() freeing cut 50024
J3D_FreeCut() freeing cut 50025
J3D_FreeCut() freeing cut 50026
J3D_FreeCut() freeing cut 50027
J3D_FreeCut() freeing cut 50028
J3D_FreeCut() freeing cut 50032
J3D_FreeCut() freeing cut 50033
J3D_FreeCut() freeing cut 50034
J3D_FreeCut() freeing cut 50035
J3D_FreeCut() freeing cut 50036
J3D_FreeCut() freeing cut 50037
J3D_FreeCut() freeing cut 50038
J3D_FreeCut() freeing cut 50039
J3D_FreeCut() freeing cut 50040
J3D_FreeCut() freeing cut 50041
J3D_FreeCut() freeing cut 50042
J3D_FreeCut() freeing cut 9082
J3D_FreeCut() freeing cut 50043
J3D_FreeCut() freeing cut 9083
J3D_FreeCut() freeing cut 50044
J3D_FreeCut() freeing cut 50045
J3D_FreeCut() freeing cut 50046
J3D_FreeCut() freeing cut 50047
J3D_FreeCut() freeing cut 50048
J3D_FreeCut() freeing cut 50049
J3D_FreeCut() freeing cut 50050
J3D_FreeCut() freeing cut 50051
J3D_FreeCut() freeing cut 50052
J3D_FreeCut() freeing cut 50053
J3D_FreeCut() freeing cut 50054
J3D_FreeCut() freeing cut 50055
J3D_FreeCut() freeing cut 50056
J3D_FreeCut() freeing cut 50057
J3D_FreeCut() freeing cut 9098
J3D_FreeCut() freeing cut 50058
J3D_FreeCut() freeing cut 9099
J3D_FreeCut() freeing cut 50059
J3D_FreeCut() freeing cut 9100
J3D_FreeCut() freeing cut 50060
J3D_FreeCut() freeing cut 9101
J3D_FreeCut() freeing cut 9102
J3D_FreeCut() freeing cut 50062
J3D_FreeCut() freeing cut 50063
J3D_FreeCut() freeing cut 50064
J3D_FreeCut() freeing cut 50065
J3D_FreeCut() freeing cut 50066
J3D_FreeCut() freeing cut 50067
J3D_FreeCut() freeing cut 50068
J3D_FreeCut() freeing cut 50069
J3D_FreeCut() freeing cut 50070
J3D_FreeCut() freeing cut 50071
J3D_FreeCut() freeing cut 50072
J3D_FreeCut() freeing cut 50073
J3D_FreeCut() freeing cut 50074
J3D_FreeCut() freeing cut 50075
J3D_FreeCut() freeing cut 50076
J3D_FreeCut() freeing cut 50077
J3D_FreeCut() freeing cut 50078
J3D_FreeCut() freeing cut 50079
J3D_FreeCut() freeing cut 50080
J3D_FreeCut() freeing cut 50081
J3D_FreeCut() freeing cut 50082
J3D_FreeCut() freeing cut 50083
J3D_FreeCut() freeing cut 50084
J3D_FreeCut() freeing cut 50085
J3D_FreeCut() freeing cut 50086
J3D_FreeCut() freeing cut 50087
J3D_FreeCut() freeing cut 50088
J3D_FreeCut() freeing cut 50089
J3D_FreeCut() freeing cut 50090
J3D_FreeCut() freeing cut 50091
J3D_FreeCut() freeing cut 50092
J3D_FreeCut() freeing cut 50093
J3D_FreeCut() freeing cut 50094
J3D_FreeCut() freeing cut 50095
J3D_FreeCut() freeing cut 50096
J3D_FreeCut() freeing cut 50097
J3D_FreeCut() freeing cut 50098
J3D_FreeCut() freeing cut 50099
J3D_FreeCut() freeing cut 50100
J3D_FreeCut() freeing cut 50101
J3D_FreeCut() freeing cut 50102
J3D_FreeCut() freeing cut 50103
J3D_FreeCut() freeing cut 50104
J3D_FreeCut() freeing cut 50105
J3D_FreeCut() freeing cut 50106
J3D_FreeCut() freeing cut 50107
J3D_FreeCut() freeing cut 50108
J3D_FreeCut() freeing cut 50109
J3D_FreeCut() freeing cut 50110
J3D_FreeCut() freeing cut 50111
J3D_FreeCut() freeing cut 50112
J3D_FreeCut() freeing cut 50113
J3D_FreeCut() freeing cut 50114
J3D_FreeCut() freeing cut 50115
J3D_FreeCut() freeing cut 50116
J3D_FreeCut() freeing cut 50117
J3D_FreeCut() freeing cut 50118
J3D_FreeCut() freeing cut 50119
J3D_FreeCut() freeing cut 50120
J3D_FreeCut() freeing cut 50121
J3D_FreeCut() freeing cut 50122
J3D_FreeCut() freeing cut 50123
J3D_FreeCut() freeing cut 50124
J3D_FreeCut() freeing cut 50125
J3D_FreeCut() freeing cut 50126
J3D_FreeCut() freeing cut 50127
J3D_FreeCut() freeing cut 50128
J3D_FreeCut() freeing cut 50129
J3D_FreeCut() freeing cut 50130
J3D_FreeCut() freeing cut 50131
J3D_FreeCut() freeing cut 50132
J3D_FreeCut() freeing cut 50133
J3D_FreeCut() freeing cut 50134
J3D_FreeCut() freeing cut 50135
J3D_FreeCut() freeing cut 50136
J3D_FreeCut() freeing cut 50137
J3D_FreeCut() freeing cut 50138
J3D_FreeCut() freeing cut 50139
J3D_FreeCut() freeing cut 50140
J3D_FreeCut() freeing cut 50141
J3D_FreeCut() freeing cut 50142
J3D_FreeCut() freeing cut 50143
J3D_FreeCut() freeing cut 50144
J3D_FreeCut() freeing cut 50145
J3D_FreeCut() freeing cut 50146
J3D_FreeCut() freeing cut 50147
J3D_FreeCut() freeing cut 50148
J3D_FreeCut() freeing cut 50149
J3D_FreeCut() freeing cut 50150
J3D_FreeCut() freeing cut 50151
J3D_FreeCut() freeing cut 50152
J3D_FreeCut() freeing cut 50153
J3D_FreeCut() freeing cut 50154
J3D_FreeCut() freeing cut 50155
J3D_FreeCut() freeing cut 50156
...
J3D_FreeCut() freeing cut 50583
J3D_FreeCut() freeing cut 50584
J3D_FreeCut() freeing cut 50585
J3D_FreeCut() freeing cut 50586
J3D_FreeCut() freeing cut 50587
J3D_FreeCut() freeing cut 50588
J3D_FreeCut() freeing cut 50589
J3D_FreeCut() freeing cut 50590
J3D_FreeCut() freeing cut 50591
J3D_FreeCut() freeing cut 50592
J3D_FreeCut() freeing cut 50593
J3D_FreeCut() freeing cut 50594
J3D_FreeCut() freeing cut 50595
J3D_FreeCut() freeing cut 50596
J3D_FreeCut() freeing cut 50598
J3D_FreeCut() freeing cut 50599
J3D_FreeCut() freeing cut 50601
J3D_FreeCut() freeing cut 50602
J3D_FreeCut() freeing cut 50603
J3D_FreeCut() freeing cut 50604
J3D_FreeCut() freeing cut 50605
J3D_FreeCut() freeing cut 50606
J3D_FreeCut() freeing cut 50607
J3D_FreeCut() freeing cut 50608
J3D_FreeCut() freeing cut 50609
J3D_FreeCut() freeing cut 50610
J3D_FreeCut() freeing cut 50611
J3D_FreeCut() freeing cut 50612
J3D_FreeCut() freeing cut 50613
J3D_FreeCut() freeing cut 50614
J3D_FreeCut() freeing cut 50616
J3D_FreeCut() freeing cut 50617
J3D_FreeCut() freeing cut 4026
J3D_FreeCut() freeing cut 4064
[TC_MemoryFlush] freed 0, released 0 of 0 cached textures
MOV_FreeVoices() 0 pages with total 0 voices entries freed.
SB_LoadLocation() loading story file x3intro
Version=5
FontHeight=15.000000
TopPadding=0.000000
BottomPadding=2.000000
FontYAdvance=13.000000
MaxGlyph=1169
NumGlyphs=612
max char height=14 (user supplied font height=13)
Version=5
FontHeight=33.000000
TopPadding=0.000000
BottomPadding=0.000000
FontYAdvance=33.000000
MaxGlyph=512
NumGlyphs=274
max char height=25 (user supplied font height=26)
LoadVoices(44)
movloadmovie success: reply=1 (1 / 3)
movloadmovie success: reply=1 (1 / 3)
movloadmovie success: reply=1 (1 / 3)
[mpegvideo @ 0xa823700] max_analyze_duration 5000000 reached at 5000000
[mpegvideo @ 0xa823700] Estimating duration from bitrate, this may be inaccurate
movloadmovie success: reply=1 (1 / 3)
../X3/s_linux/s3d.cpp : S_3DCleanAndOptimizeMesh : 3217 : dStub
../X3/s_linux/sdl2/svideo.cpp : W_RectFill : 1430 : dStub
J3D_LoadCut2: Loaded embedded body 830000001
J3D_LoadCut2: Loaded embedded body 830000002
ST_LoadCut() cut 8300 loaded
ST_StartFromIndex(8300, 1) found starttime 0, endtime 4000
Switching to Camera Camera01
Error opening movie stream: 830
Error opening movie stream: 830
======================================
Failed loading movie 830
======================================
Failed stoping movie 830
ST_UnloadCut() cut 8300 start
ST_UnloadCut() starting unload cut 8300, numinst=3
J3D_FreeCut() freeing cut 8300
No dump, because DEBUG disabled
[TC_MemoryFlush] freed 5, released 0 of 5 cached textures
MOV_FreeVoices() 156 pages with total 11263 voices entries freed.
No dump, because DEBUG disabled
[TC_MemoryFlush] freed 0, released 0 of 0 cached textures
MOV_FreeVoices() 0 pages with total 0 voices entries freed.
SB_LoadLocation() loading story file x3intro
LoadVoices(44)
movloadmovie success: reply=1 (1 / 17)
movloadmovie success: reply=1 (1 / 17)
movloadmovie success: reply=1 (1 / 17)
[mpegvideo @ 0xa6eefc0] max_analyze_duration 5000000 reached at 5000000
[mpegvideo @ 0xa6eefc0] Estimating duration from bitrate, this may be inaccurate
movloadmovie success: reply=1 (1 / 17)
J3D_LoadCut2: Loaded embedded body 831000001
J3D_LoadCut2: Loaded embedded body 831000002
ST_LoadCut() cut 8310 loaded
ST_StartFromIndex(8310, 1) found starttime 0, endtime 13000
Switching to Camera Camera01
movloadmovie success: reply=1 (1 / 21)
../X3/s_linux/s3d.cpp : RenderInit : 11936 : dStub
../X3/s_linux/s3d.cpp : CheckVisibility : 15567 : dPStub: What SHOULD this be, no documentation Ive found shows [] operators for this - Confirmed it is the nth float so 8 would be m[1][3]

../X3/s_linux/s3d.cpp : RenderExit : 11975 : dStub
ST_UnloadCut() cut 8310 start
ST_UnloadCut() starting unload cut 8310, numinst=3
J3D_FreeCut() freeing cut 8310
No dump, because DEBUG disabled
[TC_MemoryFlush] freed 5, released 0 of 5 cached textures
MOV_FreeVoices() 156 pages with total 11263 voices entries freed.
No dump, because DEBUG disabled
[TC_MemoryFlush] freed 0, released 0 of 0 cached textures
MOV_FreeVoices() 0 pages with total 0 voices entries freed.
SB_LoadLocation() loading story file x3intro
LoadVoices(44)
movloadmovie success: reply=1 (1 / 98878)
movloadmovie success: reply=1 (1 / 98878)
movloadmovie success: reply=1 (1 / 98878)
[mpegvideo @ 0xa348720] max_analyze_duration 5000000 reached at 5000000
[mpegvideo @ 0xa348720] Estimating duration from bitrate, this may be inaccurate
movloadmovie success: reply=1 (1 / 98878)
../X3/s_linux/sys_sfx.cpp : S_SFXSetEAXRoom : 1100 : dStub
ST_LoadCut() cut 6004 loaded
ST_StartFromIndex(6004, 1) found starttime 0, endtime 12000
Switching to Camera Camera01
Sent CutEvent t=0 fadein 1000
Sent CutEvent t=11000 fadeout 1000
ST_UnloadCut() cut 6004 start
ST_UnloadCut() starting unload cut 6004, numinst=2
J3D_FreeCut() freeing cut 6004
No dump, because DEBUG disabled
J3D_FreeCut() freeing cut 7004
[TC_MemoryFlush] freed 5, released 0 of 5 cached textures
MOV_FreeVoices() 156 pages with total 11263 voices entries freed.
No dump, because DEBUG disabled
[TC_MemoryFlush] freed 0, released 0 of 0 cached textures
MOV_FreeVoices() 0 pages with total 0 voices entries freed.
SB_LoadLocation() loading story file x3intro
LoadVoices(44)
movloadmovie success: reply=1 (1 / 159092)
movloadmovie success: reply=1 (1 / 159092)
movloadmovie success: reply=1 (1 / 159092)
[mpegvideo @ 0x9f967a0] max_analyze_duration 5000000 reached at 5000000
[mpegvideo @ 0x9f967a0] Estimating duration from bitrate, this may be inaccurate
movloadmovie success: reply=1 (1 / 159092)
ST_LoadCut() cut 948 loaded
----
Warning! Some triangles have zero area!
----
----
Warning! Some triangles have zero area!
----
======================================
ERROR: Unable to load texture 'textures\F:\SRC\X3.5\[Assets]\Terran\x3.5 Textures\Textures\envmap', using dummy texture!
======================================
movloadmovie success: reply=1 (1 / 160811)

[/code]

isosphere
Posts: 9
Joined: Fri, 3. May 24, 23:47
x4

Re: X3FL [Linux] - Launcher Crash from Steam

Post by isosphere » Sat, 18. May 24, 15:52

Nothing stands out to me there. I'll share with you my console when launching "X3AP_config" and launching the game from there (not FL, but should be similar?); some of the warnings/errors are similar, you can probably at least ignore what we have in common.

I've addressed the "Unable to locate theme engine" errors on my system by installing relevant libraries; it makes the warnings go away but I don't think it was necessary. If you google those lines you should find the appropriate libraries to "apt install".

Here's a successful run on my system:

Code: Select all

 % ./X3AP_config
../X3/s_linux/init.cpp : XMenuInit : 254 : dStub
../X3/s_linux/simd_float.cpp : lgp_get_cpu_flags : 12 : dStub
ERROR: CPUID is not supported, can't detect CPU features
Trying to continue anyway with minimal settings
Video category:
Monitor Idx = 0
Width = 1280
Height = 800
Bits Per Pixel = 32
Vertical Sync = 0
Border Less = 1
Texture Quality = 2
Shader Quality = 0
View Distance = 3
AA Mode = -1
AF Mode = -1
Gamma = 127
Frame Finish = 0
Hack FPS Replace Text = 0
Lower AQC FrameRate = 10.000000
Upper AQC FrameRate = 25.000000
Memory = 128
Audio category:
Master Volume = 255
SFX Volume = 255
Voice Volume = 179
Music Volume = 255
Input category:
Mouse Grab = 1
Joy Index = 0
Joy 1X Src = 0
Joy 1Y Src = 1
Joy 2X Src = 2
Joy 2Y Src = 3
Joy Rudder Src = 5
Joy Throttle Src = 4
Joy TriggerL Src = 6
Joy TriggerR Src = 7
Joy 1X Scale = 1.000000
Joy 1Y Scale = 1.000000
Joy 2X Scale = 1.000000
Joy 2Y Scale = 1.000000
Joy Rudder Scale = 1.000000
Joy Throttle Scale = 1.000000
Joy TriggerL Scale = 1.000000
Joy TriggerR Scale = 1.000000
Joy Button0 Src = 0
Joy Button1 Src = 1
Joy Button2 Src = 2
Joy Button3 Src = 3
Joy Button4 Src = 4
Joy Button5 Src = 5
Joy Button6 Src = 6
Joy Button7 Src = 7
Joy Button8 Src = 8
Joy Button9 Src = 9
Joy Button10 Src = 10
Joy Button11 Src = 11
Joy Button12 Src = 12
Joy Button13 Src = 13
Joy Button14 Src = 14
Joy Button15 Src = 15
Joy Button16 Src = 16
Joy Button17 Src = 17
Joy Button18 Src = 18
Joy Button19 Src = 19
Joy Button20 Src = 20
Joy Button21 Src = 21
Joy Button22 Src = 22
Joy Button23 Src = 23
Joy Button24 Src = 24
Joy Button25 Src = 25
Joy Button26 Src = 26
Joy Button27 Src = 27
Joy Button28 Src = 28
Joy Button29 Src = 29
Other category:
Mod Name = (null)
Capture Folder = screenshots
Profile = default
Player Logo Number = 0
Player Logo Name = (null)
../X3/s_linux/init.cpp : S_GetCPUSpeed : 341 : dStub
Gtk-Message: 10:25:04.048: Failed to load module "atk-bridge"

(X3AP_config:5062): Gtk-WARNING **: 10:25:04.058: Unable to locate theme engine in module_path: "adwaita",
../X3/s_linux/ConfigDialogLin.cpp : Video_DisplayChange : 2508 : monitoridx =           0
../X3/s_linux/ConfigDialogLin.cpp : Video_DisplayChange : 2508 : monitoridx =           0
../X3/s_linux/sdl2/sio.cpp : main : 1250 : dPStub: atexit (_quit);
../X3/s_linux/init.cpp : XMenuInit : 254 : dStub
../X3/s_linux/simd_float.cpp : lgp_get_cpu_flags : 12 : dStub
ERROR: CPUID is not supported, can't detect CPU features
Trying to continue anyway with minimal settings
[S_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed.
[S_API FAIL] SteamAPI_Init() failed; unable to locate a running instance of Steam, or a local steamclient.so.
Video category:
Monitor Idx = 0
Width = 1600
Height = 900
Bits Per Pixel = 32
Vertical Sync = 0
Border Less = 1
Texture Quality = 2
Shader Quality = 0
View Distance = 3
AA Mode = -1
AF Mode = -1
Gamma = 127
Frame Finish = 0
Hack FPS Replace Text = 0
Lower AQC FrameRate = 10.000000
Upper AQC FrameRate = 25.000000
Memory = 128
Audio category:
Master Volume = 255
SFX Volume = 255
Voice Volume = 179
Music Volume = 255
Input category:
Mouse Grab = 1
Joy Index = 0
Joy 1X Src = 0
Joy 1Y Src = 1
Joy 2X Src = 2
Joy 2Y Src = 3
Joy Rudder Src = 5
Joy Throttle Src = 4
Joy TriggerL Src = 6
Joy TriggerR Src = 7
Joy 1X Scale = 1.000000
Joy 1Y Scale = 1.000000
Joy 2X Scale = 1.000000
Joy 2Y Scale = 1.000000
Joy Rudder Scale = 1.000000
Joy Throttle Scale = 1.000000
Joy TriggerL Scale = 1.000000
Joy TriggerR Scale = 1.000000
Joy Button0 Src = 0
Joy Button1 Src = 1
Joy Button2 Src = 2
Joy Button3 Src = 3
Joy Button4 Src = 4
Joy Button5 Src = 5
Joy Button6 Src = 6
Joy Button7 Src = 7
Joy Button8 Src = 8
Joy Button9 Src = 9
Joy Button10 Src = 10
Joy Button11 Src = 11
Joy Button12 Src = 12
Joy Button13 Src = 13
Joy Button14 Src = 14
Joy Button15 Src = 15
Joy Button16 Src = 16
Joy Button17 Src = 17
Joy Button18 Src = 18
Joy Button19 Src = 19
Joy Button20 Src = 20
Joy Button21 Src = 21
Joy Button22 Src = 22
Joy Button23 Src = 23
Joy Button24 Src = 24
Joy Button25 Src = 25
Joy Button26 Src = 26
Joy Button27 Src = 27
Joy Button28 Src = 28
Joy Button29 Src = 29
Other category:
Mod Name = (null)
Capture Folder = screenshots
Profile = default
Player Logo Number = 0
Player Logo Name = (null)
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 211 : dPStub: Setting D3DF_ALPHATRANS to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 214 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 216 : dPStub: Setting D3DF_MODULATEALPHA to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 219 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 221 : dPStub: Setting D3DF_MULTITEXTURE to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 224 : dStub
../X3/s_linux/init.cpp : S_GetCPUSpeed : 341 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_InitVideo : 1109 : dPStub: SDL_WM_SetIcon( icon, NULL );
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 211 : dPStub: Setting D3DF_ALPHATRANS to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 214 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 216 : dPStub: Setting D3DF_MODULATEALPHA to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 219 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 221 : dPStub: Setting D3DF_MULTITEXTURE to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 224 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_Create3DDevice : 379 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_Create3DDevice : 382 : glGetString(GL_VENDOR) =               Intel
../X3/s_linux/sdl2/svideo.cpp : S_Create3DDevice : 383 : glGetString(GL_RENDERER) =             Mesa Intel(R) HD Graphics 3000 (SNB GT2)
../X3/s_linux/sdl2/svideo.cpp : S_Create3DDevice : 384 : glGetString(GL_VERSION) =              3.3 (Compatibility Profile) Mesa 22.3.6
../X3/s_linux/sdl2/svideo.cpp : S_Create3DDevice : 385 : glGetString(GL_SHADING_LANGUAGE_VERSION) =             3.30
../X3/s_linux/sdl2/svideo.cpp : S_Create3DDevice : 421 : dPStub: Need to detect if postprocess must be turned off
../X3/s_linux/sdl2/svideo.cpp : S_Create3DDevice : 436 : dPStub: Not sure if we don't need to load some LightMaps here?
../X3/s_linux/sdl2/svideo.cpp : W_RectFill : 1430 : dStub
../X3/s_linux/init.cpp : Int_OpenAL_Init : 906 : al first err 0
dS3D_NameSpace(InitPostProcessFX)dS3D_NameSpace(InitPostProcessFX)dS3D_NameSpace(InitPostProcessFX)dS3D_NameSpace(InitPostProcessFX)dS3D_NameSpace(InitPostProcessFX)
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
[mpegvideo @ 0x15462f60] max_analyze_duration 5000000 reached at 5000000
[mpegvideo @ 0x15462f60] Estimating duration from bitrate, this may be inaccurate
../X3/s_linux/s3d.cpp : S_3DCleanAndOptimizeMesh : 3217 : dStub
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
[mpegvideo @ 0x15a65da0] max_analyze_duration 5000000 reached at 5000000
[mpegvideo @ 0x15a65da0] Estimating duration from bitrate, this may be inaccurate
../X3/s_linux/s3d.cpp : RenderInit : 11936 : dStub
../X3/s_linux/s3d.cpp : CheckVisibility : 15567 : dPStub: What SHOULD this be, no documentation Ive found shows [] operators for this - Confirmed it is the nth float so 8 would be m[1][3]

../X3/s_linux/s3d.cpp : RenderExit : 11975 : dStub
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
[mpegvideo @ 0x1492f920] max_analyze_duration 5000000 reached at 5000000
[mpegvideo @ 0x1492f920] Estimating duration from bitrate, this may be inaccurate
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
[mpegvideo @ 0x1d5f3820] max_analyze_duration 5000000 reached at 5000000
[mpegvideo @ 0x1d5f3820] Estimating duration from bitrate, this may be inaccurate
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
----
Warning!  Some triangles have zero area!
----
../X3/s_linux/sdl2/sio2.cpp : S_DIPlayForceEffect : 191 : dStub
../X3/s_linux/sdl2/sio2.cpp : S_DIPlayForceEffect : 191 : dStub
../X3/s_linux/sdl2/sio2.cpp : S_DIPlayForceEffect : 191 : dStub
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
[mpegvideo @ 0x157125c0] max_analyze_duration 5000000 reached at 5000000
[mpegvideo @ 0x157125c0] Estimating duration from bitrate, this may be inaccurate
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
----
Warning!  Some triangles have zero area!
----
../X3/s_linux/s_movie.cpp : S_OpenMovie : 1042 : ov_open -132
../X3/s_linux/sys_sfx.cpp : S_CloseAudio : 1196 : dStub
AL lib: (EE) alc_cleanup: 1 device not closed

aradapilot
Posts: 22
Joined: Wed, 18. May 11, 05:41
x4

Re: X3FL [Linux] - Launcher Crash from Steam

Post by aradapilot » Sun, 19. May 24, 07:02

Well, at least we've ruled out a bunch of things. I wish these logs were more verbose...passing DEBUG=1 doesn't add any. It's closed-source, so I have limited options here unless others had the same issue or a developer can add some info.


To compare it CLI-launched/non-steam, this section of the startup logs:

No dump, because DEBUG disabled
SB_LoadLocation() loading story file x3config
No dump, because DEBUG disabled
../X3/s_linux/sdl2/svideo.cpp : S_InitVideo : 1109 : dPStub: SDL_WM_SetIcon( icon, NULL );
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 211 : dPStub: Setting D3DF_ALPHATRANS to true without test

../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 214 : dStub
../X3/s_linux/sdl2/svideo.cpp : S_SetDefault3DSettings : 216 : dPStub: Setting D3DF_MODULATEALPHA to true without test



Vs the same section, when using steam, which fails:

No dump, because DEBUG disabled
SB_LoadLocation() loading story file x3config
No dump, because DEBUG disabled
Fatal glibc error: malloc.c:2594 (sysmalloc): assertion failed: (old_top == initial_top (av) && old_size == 0) || ((unsigned long) (old_size) >= MINSIZE && prev_inuse (old_top) && ((unsigned long) old_end & (pagesize - 1)) == 0)
/home/xxx/.steam/steam/steamapps/common/X3 Terran Conflict/testandlaunch: line 32: 18716 Aborted (core dumped) ./$cmd "$@"

aradapilot
Posts: 22
Joined: Wed, 18. May 11, 05:41
x4

Re: X3FL [Linux] - Launcher Crash from Steam

Post by aradapilot » Fri, 24. May 24, 18:01

this may be a recent steam issue regarding older (32bit) games, I found this other reference to similar behavior

https://steamcommunity.com/app/322190/d ... 1716536927

but without knowing what change in steam caused it, tough to know how to solve it

Post Reply

Return to “X³: Terran Conflict / Albion Prelude / Farnham's Legacy - Technical Support”